Hackintosh Mac Os Mojave Download [TOP]
DOWNLOAD >> https://bltlly.com/2tvrUy
How to Install macOS Mojave on a Hackintosh PC
macOS Mojave is the latest version of the Mac operating system, which offers new features such as Dark Mode, Dynamic Desktop, Stacks, and more. If you want to experience macOS Mojave on your PC, you can install it using a tool called UniBeast. UniBeast is a software that creates a bootable USB installer from the macOS Mojave app that you download from the Mac App Store. You can then use the USB installer to install macOS Mojave on any supported Intel-based PC.
In this article, we will show you how to use UniBeast to create a macOS Mojave USB installer and how to install macOS Mojave on your Hackintosh PC.
Requirements
A PC with an Intel processor that supports SSE4.1 instruction set. You can check your processor compatibility here.
A Mac running OS X Lion 10.7.5 or later, or a Hackintosh running macOS High Sierra or later.
A 16GB or larger USB drive formatted as Mac OS Extended (Journaled) with the name \"USB\".
The macOS Mojave app downloaded from the Mac App Store.
The latest version of UniBeast downloaded from here.
The latest version of MultiBeast downloaded from here. MultiBeast is a tool that helps you configure your Hackintosh after installation.
A backup of your existing system and data. Installing macOS Mojave may erase your drive or cause data loss.
Step 1: Create a macOS Mojave USB Installer with UniBeast
Launch UniBeast and click Continue.
Agree to the license agreement and click Continue.
Select your USB drive as the destination and click Continue.
Select Mojave as the operating system and click Continue.
Select UEFI Boot Mode or Legacy Boot Mode depending on your system. UEFI Boot Mode is recommended for newer systems that support UEFI. Legacy Boot Mode is recommended for older systems that use BIOS. Click Continue.
Select the graphics configuration that matches your system. If you have an NVIDIA graphics card, select Inject NVIDIA. If you have an AMD graphics card, select Inject ATI. If you have an Intel graphics card, select Inject Intel. If you are not sure, leave it as default. Click Continue.
Verify your settings and click Continue.
Enter your password and click Install.
Wait for UniBeast to create the bootable USB installer. This may take some time depending on your USB speed and system performance.
Once done, you will see a message saying \"Copy Complete. Done.\"
Step 2: Install macOS Mojave on Your Hackintosh PC
Plug the USB installer into your PC and turn it on.
Press the boot menu key (usually F12, F10, or F8) to select the USB drive as the boot device.
You will see the Clover bootloader screen. Select Boot macOS Install from Install macOS Mojave and press Enter.
You will see the Apple logo and a progress bar. Wait for the installer to load.
Select your language and click Continue.
From the menu bar, select Utilities > Disk Utility.
Select your hard drive or SSD where you want to install macOS Mojave. If it is not formatted as Mac OS Extended (Journaled), click Erase and choose that format with the name \"Macintosh HD\". Click Erase and confirm.
Close Disk Utility and click Continue on the installer screen.
Select Macintosh HD as the destination and click Install. aa16f39245